VIBRANT FIRE 940 - complete hydrofoil

In stock

VIBRANT FIRE 940 – complete hydrofoil

Complete hydrofoil with front wing span of 940 mm, 180 mm center width and an area of ​​1300 cm2. A smaller and faster foil that provides enough lift for all levels from approx. 75 kg and lighter. The foil slides well through the water with minimal "drag" and good speed, and yet stable and easy to swing in the waves and jibs. The rear wing or stabilizer as it is also called is available in two sizes; the largest with a wingspan of 485 mm which ensures easy take off and stability with a flat profile, and a smaller, thinner and faster one with a wingspan of 400 mm with the opposite curve which is more playful in waves and jibs. The wings are made of pre-preg carbon which provides stiff and light constructions.

The mast is made of aluminum with a good aerodynamic profile and is attached with long threads to both the fuselage and the base plate, which is also aluminum in orange "fire" colour. The choice of mast depends on how high you want to fly above the water and the waves and how deep it is where you go out. For shorter people, it may be easier to handle a lower mast. You can choose between a mast height of 800 mm and 900 mm depending on the area of ​​use.

Optional fuselage of 700 mm or 800 mm with replaceable (helicoil) threads with 8 mm at the front and 6 mm at the rear. Deep, strong and stable attachment for the mast with 8 mm screws.
The package contains a screw set with all screws, solid brass nuts for the base plate and Allen keys.

The hydrofoil can be attached to the board with a US fin box with a standard base plate or a Tuttle box for windsurf boards. When purchasing a complete foil, it comes with a practical bag with pockets for the various parts.

We have thoroughly tested the foil on wingfoil, windfoil, wakefoil after boat, foil pumping and here you get an all-round foil where you can master "flying".